| array | Ø To use a Rectangular array option Ø To use a Polar array option |
| Rotate | Ø To rotate an object in clock wise direction or anti clockwise direction |
| Trim | Ø To use the trim commands |
| Extend | Ø To use the extend ( project/edge/undo) |
| Break | Ø To use the break at a point command Ø to use the break command Ø to use the First-point option |
| Chamfer | Ø To create a chamfer (polyline/distance/angle/trim/method) |
| Fillet | Ø To draw a fillet (polyline/radius/trim) |
| Osnap | Ø To access the object Snap toolbar Ø To turn Osnap on, To change the size of the Osnap cursor box Ø Osnap –End point ( to snap to the endpoint of a line) Ø Osnap –snap from (to move a line, To change the angle & the length of a line) Ø To apply the snap from option to a circle, Osnap – Midpoint ( to draw a circle about the midpoint of a line) Ø Osnap –Intersection (To use the osnap ontersection command to define an ellipse) Ø Osnap-apparent Intersection (To draw a circle centered about an apparent intersection) Ø Osnap –center ( to draw a line to the center point of a circle) Ø Osnap-Quadrant ( To draw a line to one of a circle’s quadrant point) Ø Osnap-perpendicular ( to draw a line perpendicular to a line) Ø Osnap-Tangent ( to draw a line tangent to a circle) Ø Osnap-nearest ( To draw a line from a point to the nearest selected point on an existing line) |
| Grips | Ø To turn the grip function off Ø to access the grips dialog box, |
| Blocks insert | Ø To create a block Ø To insert a block Ø To change the scale of a block Ø To explode a block Ø To insert blocks at different angles |
| Write block | Ø To create a wblock Ø To verify that a wblock has been created Ø To insert a wblock into a drawing. |
| layers | Ø To create new layers Ø To change the color & linetype of a layer Ø To draw in different layers,To change layer Ø To change the scale of a linetypes Ø To use the global line type scale factor, |
| Match properties | Ø To use the match properties tool Ø To turn layers off |
| Attributes | Ø To add an attribute to a block Ø To create a new block that includes attributes Ø To insert an existing block with attributes Ø To edit an existing attribute Ø To use the edit global command Ø Title blocks with attributes, |
| array | Ø To use a Rectangular array option Ø To use a Polar array option |
| Rotate | Ø To rotate an object in clock wise direction or anti clockwise direction |
| Trim | Ø To use the trim commands |
| Extend | Ø To use the extend ( project/edge/undo) |
| Break | Ø To use the break at a point command Ø to use the break command Ø to use the First-point option |
| Chamfer | Ø To create a chamfer (polyline/distance/angle/trim/method) |
| Fillet | Ø To draw a fillet (polyline/radius/trim) |
| Osnap | Ø To access the object Snap toolbar Ø To turn Osnap on, To change the size of the Osnap cursor box Ø Osnap –End point ( to snap to the endpoint of a line) Ø Osnap –snap from (to move a line, To change the angle & the length of a line) Ø To apply the snap from option to a circle, Osnap – Midpoint ( to draw a circle about the midpoint of a line) Ø Osnap –Intersection (To use the osnap ontersection command to define an ellipse) Ø Osnap-apparent Intersection (To draw a circle centered about an apparent intersection) Ø Osnap –center ( to draw a line to the center point of a circle) Ø Osnap-Quadrant ( To draw a line to one of a circle’s quadrant point) Ø Osnap-perpendicular ( to draw a line perpendicular to a line) Ø Osnap-Tangent ( to draw a line tangent to a circle) Ø Osnap-nearest ( To draw a line from a point to the nearest selected point on an existing line) |
| Grips | Ø To turn the grip function off Ø to access the grips dialog box, |
| Blocks insert | Ø To create a block Ø To insert a block Ø To change the scale of a block Ø To explode a block Ø To insert blocks at different angles |
| Write block | Ø To create a wblock Ø To verify that a wblock has been created Ø To insert a wblock into a drawing. |
| layers | Ø To create new layers Ø To change the color & linetype of a layer Ø To draw in different layers,To change layer Ø To change the scale of a linetypes Ø To use the global line type scale factor, |
| Match properties | Ø To use the match properties tool Ø To turn layers off |
| Attributes | Ø To add an attribute to a block Ø To create a new block that includes attributes Ø To insert an existing block with attributes Ø To edit an existing attribute Ø To use the edit global command Ø Title blocks with attributes, |
